Tweeters are instruments that are capable of producing very high frequencies. Sometimes it also produces sounds which are the highest limit of the human. The reason for its name is also obtained from high frequency sound from birds. These tweeters are generally attached with the speaker to produce much higher sound. It has to be fixed to the speaker using frequency crossover. This ensures no damage to tweeter since it might get damaged if it receives the same power as that of the speaker. The function of the crossover is to adjust the frequency in the optimal way and also transmit enough power so as to not damage the tweeter. The sound is generally split in such a way between both woofer and the tweeter in such a way that the sound with high frequency is taken by tweeter and the low frequency by woofer. This connection can be learnt by reading this article on how to wire a tweeter to a speaker.

Most of the people think that the tweeter can be connected directly to the speaker. But this concept is only partially correct. The tweeter is not supposed to receive the same intensity of power as the woofer or speaker does. The tweeter can receive high frequency sound waves whereas the speaker or woofer can take only low frequency sound waves. If the tweeter is connected directly to the speaker the tweeter may get damaged and so, to prevent this damage you also want a frequency crossover. Only in presence of this frequency crossover you can say that the installation of tweeter – speaker circuit is complete.

This article includes the things that are required to make the installation of this circuit complete and the instructions that will guide you to connect the circuit in the correct order and hence prevent the tweeter getting damaged. The things that you need are tweeter, speaker, crossover cable, screw driver, soldering iron and solder. Make all these things ready before you start the work to save your valuable time.

Secondly, the grill of the speaker is removed. Sometimes based on the car, the panel may also be removed before removing the speaker. After removing the panel or the grill, the speaker is removed. This can be done with the help of screwdriver to remove the screws that are used for supporting the speaker. Then the wiring is disconnected.

The input leads of the crossover’s cable are soldered to the output leads or output wires of the stereo’s speaker carefully. Soldering is done using the solder iron and soldering device. This will play the role of the speaker wires that were actually connected to the stock speakers of your car. Care should be taken to note that the negative leads are connected together and the positive leads are connected together.

While soldering one point should be kept clear that is the positive terminal of the cross over must be connected to the positive terminal of the speaker and in the same way the two negative terminals must be connected to each other.

Now connect the high frequency leads to the tweeter and the low frequency to the woofer. While making this connections one must clearly observe if the connection are done properly. That is positive terminal is connected with positive and negative to negative terminals.

Thus we have learnt How to Wire a Tweeter to a Speaker with ease from this article.

You Should Also Check Out This Post:

• Why You Need An Internal Frame Backpack
• Get Your Car Speakers For Great Sound
• Factors To Consider When Buying A Netbook
• How To Examine Your Contact Lenses
• How To Look For Laptop Deals Online

More Active Posts:

• Sony Cyber-shot DSC-N1 Digital Camera (10)
• Nikon D200 Digital Camera (10)
• Nikon D80 Digital Camera (8)
• Sony Cyber-shot DSC-T100 Digital Camera (7)
• Sony Cyber-shot DSC-W55 Digital Camera (4)
• Optoma Optoma MovieTime DV10 Projector (2)
• Nikon Coolpix S200 Digital Camera (2)